Panel Builder System Integrator

PBSI Milner 400September 30, 2019

By Blake Marchand

Rob Milner is the Canadian National Science, Automation, Optical Gas Imaging & sUAS Manager for FLIR. Rob took some time out of his busy schedule to discuss his career and provide some insight on the industry with Panel Builder & Systems Integrator.

Mr. Milner began his 18-year tenure with FLIR in 2001 as Sales Manager for the Ontario and Manitoba region. After ten-years in that role he was promoted to National Science & Automation Sales Manager, and in 2016 he took on his current role as National Science, Automation, Optical Gas Imaging & sUAS Manager.

Managing the business development of four vertical markets, Milner’s role is highly technical as well as customer facing. When it comes to automation FLIR makes a number of different products, he explained providing an example of a portion of his role, “I refer to them as different flavours – some speak directly to PLCs, others have to go through complex machine vision type software to arrive at an analysis of the issue,” with respect to a particular client’s application, Milner will provide oversight to ensure measurements and camera placements are correct, for example, as well as making sure the proper technologies are being utilized for a given application. Ultimately, ensuring that all factors have been taken into consideration.

Throughout his 18-year career with FLIR, Milner said there isn’t much he hasn’t seen when it comes to applications of their products, which are utilized across a wide range of industries. However, he singled out a couple intriguing applications he has seen.Weld seam issue

The first is the growing use of artificial intelligence that has developed to perform very complex inspections utilizing thermal cameras designed for automated monitoring. This has enabled inspection of automotive parts, for example, where you can’t see the defect directly, but you can infer it is there due to the change in the imagery; or the ability to detect liquid leaks in processes in complex outdoor environments. FLIR’s Canadian automation partners have developed these applications and are growing their installed base rapidly. 

Rob also singled out infrared switchgear condition monitoring for low, medium, and high voltage cabinets to continuously monitor for potential issues without having to open the cabinet door. Essentially, anywhere that employs a significant electrical load. The example Milner provided was for large residential buildings, at the time there happened to be a couple fires reported in the news. Generally, these types of buildings are inspected once a year and most likely the inspection will take place during the day when usage isn’t at its peak. Using an infrared camera for continuous monitoring allows for a more accurate picture of the building’s electrical health, detecting electrical connectionpotential fires before there’s an issue.

When it comes to the automation and electrical side of the company, FLIR’s products facilitate an intelligent industry. Which includes oil and gas maintenance issues, from invisible gas leaks to failing electrical or mechanical systems; maintaining uptime for electrical utility power generation and troubleshooting issues at the residential and commercial level; mechanical and electrical condition monitoring; machine vision; and high-tech monitoring to detect potential issues before failures. Their vision systems are crucial to facilitating the proliferation of autonomous systems of all kind, as well as to maximize uptime by detecting issues before they impact production. With respect to the latter, Milner makes an important distinction between ‘preventive maintenance’ and ‘condition monitoring’.

“Preventative maintenance historically involves tightening connections and tightening connections can actually be harmful if you don’t need to do it. So, we like to use condition monitoring. Making sure your target – whether it’s a motor, a piece of electrical equipment, or a pump, is staying the same temperature over time. Or, if there’s multiple phases, for example, all phases are tracking up and down in temperature based on load, together.”

“You’re not likely to have all three phases fail at the same time – if you have an electrical problem, one phase is going to fail and that’s going to be easily visible as a divergence from the other two temperatures.”

Industry 4.0 – automated production, quality control, aerial drone inspection, artificial intelligence etc. – is tailored to FLIR’s expertise, “Automated condition monitoring is key to that (industry 4.0), so our systems are being used more and more,” noted Milner, “even our hand-held systems are being used as sensors. That data that comes through periodically is still going up into the cloud to monitor the health of the factory of the future.”

When it comes to emerging technologies that will be more prevelent moving forward in the industry, Milner mentioned that unmanned aerial vehicles (UAV) will be a tool for the industry to utilize in this vein in the near future. UAVs will have a number of maintenance and inspection applications. Field operations monitoring in remote areas, windmills, solar panels, commercial and industrial roof inspection is the big one, Milner noted. The inspection of infrastructure like roads and bridges in particular, as well as in agriculture, and electrical transmission are all areas where aerial vehicles can be utilized It’s something that simply wasn’t possible five years ago, Milner noted, and for the most part drones are currently human-piloted. However, eventually they will be able to take off, land, and inspect autonomously.

Ultimately, with respect to FLIR product applications, Milner said, if there is an application where you can gain information visually, FLIR’s systems can be utilized.

In closing, Mr. Milner said, “One of the things I would like to get across to people is automating the use of thermal imaging is getting easier and lower in cost than it has been in the past. A lot of people’s experience with our camera is from a decade ago – when I started, we didn’t sell anything that was under $50,000, now we have thermal camera for less than $500.” Many people in the industry may have the impression their products are too expensive and difficult to deal with, “but that’s not true anymore, thermal cameras can be very cost competitive to other technologies and provide better monitoring of critical equipment and production methods.”

They're still on that downward pricing trend he noted, “we’re literally putting cameras all over the place, where you’d never expect to find them.”

Image One Caption (Weld seam issue):

Thermal image of a weld seam defect captured in real time using artificial intelligence software to learn and apply complex analytics in a simple fashion.

Image Two Caption (Electrical connection):

Caption : Electrical equipment carrying high currents in electrical cabinets can now be autonomously monitored 24/7, at a cost much lower than periodic inspection providing improved equipment reliability at a lower cost.

Changing Scene

  • Prev
Recently, Phoenix Contact Canada Ltd. was proud to announce and welcome Robert Kostash, P. Eng., as ...
The technology enables rapid prototyping of vehicle tires through precise laser material ...
Lakeside was recently excited to announce the opening of a new service center and office located at ...
EPLAN offers a variety of training courses to help you further your knowledge and make you a better ...
Littelfuse, Inc. recently announced it has acquired Hartland Controls. Headquartered in ...
Rittal Systems Ltd. (Rittal Canada) was recently pleased to introduce their new experienced ...
Power management company Eaton recently announced it has signed an agreement to acquire Tripp Lite, ...
Phoenix Contact Ltd. is proud to announce and welcome Udayan Pandya as the Company’s Head of ...
Robomold Plastic Solutions, a division of Gemini Inc., recently announced that it has partnered ...
EY Canada is pleased to welcome Montreal-based Resolution Inc. to the firm today to enhance its ...

Spartan Controls Announces New Strategic Distribution Agreement with Profire Energy Inc.

Profire Energy IncSpartan Controls Ltd. was recently pleased to announce a new strategic distribution agreement with Profire Energy Inc, a technology company that provides solutions which enhance the efficiency, safety, and reliability of industrial combustion appliances while mitigating potential environmental impacts related to the operation of these devices. 

Profire specializes in the engineering and design of burner and combustion management systems and solutions used on a variety of natural and forced draft applications. This strategic partnership will enable both companies to work collaboratively to support and supply combustion packages to new and existing customers in Western Canada. 

Read More


 

Lakeside Launches New Service Center and Office in Sudbury, Ontario

Lakeside Launches New Service CenterLakeside was recently excited to announce the opening of a new service center and office located at 131 Fielding Road, Lively, Ontario, (705)-585-4900. With this new space Lakeside will be able to focus on localized service for more efficient turnaround, and even quicker response times.

The Service Center is 4235 sq/ft, with an additional 2000 sq/ft of storage space on site. Lakeside have also relocated their sales office to this same site in order to centralize Lakeside’s service and support to one location. At this new service and assembly center, they will hold an inventory of Clarkson knife gate valves (KGV) for new and ENCORE assemblies. 

Read More


 

 

 

Latest Articles

  • Prev
2020 will probably go down in history as being the year of ultimate challenges, but the HVAC ...
The demand for digital solutions in industry is continuously increasing at a high level. What ...
Carlo Gavazzi is a global provider of automation components. With a 90-year history in the industry ...
When you decide to deploy a robotic cell, it’s usually because you’re aiming to solve some issues ...
In the life sciences industry, quality is everything. But batch record review is a ...
In today’s world, the key differentiator that can set your organization apart is simply Competence ...
Behind every electrical engineering project are many individual components and thus a whole ...
020 marked a new era in Canada for the Automation and Manufacturing sectors, as they ramped up in ...
For more than a decade, industrial companies have counted on True North Solutions for expert ...
Since the foundation of VisionTools in 1986, a highly motivated team of meanwhile more ...

Product News

  • Prev
AutomationDirect’s BRX PLC Series has joined the Azure Certified Device program, ensuring customers ...
AutomationDirect has added Schmersal IEC limit switches to its lineup. These limit switches are ...
Any time an electrician or technician makes a voltage measurement on a live conductor, there is a ...
AutomationDirect has added a variety of new ProSense inductive proximity sensors to their ...
The FLIR Vue TZ20, the first high resolution, dual thermal sensor gimbal purpose-built for the ...
Manufacturers of EVSE (charging stations) will be excited to learn that Bender has recently ...
With the new drive controllers PMC SC6 and PMC SI6, Pilz is expanding its portfolio of servo ...
The digital transformation of engineering continues advancing. As part of its cloud services, Eplan ...
Traceability is vital for protecting your brand, and it can also provide valuable information for ...

Streamline Your Production With a Robust System That Tracks Works-in-Progress in Real Time

Omron Traceability 4.0Traceability is vital for protecting your brand, and it can also provide valuable information for improving your processes. Omron use their vast experience in track, trace and control to help manufacturers in the pharmaceutical and biomedical industries build robust systems that ensure quality while boosting productivity.

Whether you’re seeking a solution for regulatory compliance (DSCSA), quality control, process improvements or something else, Omron believes in the importance of keeping you up to date on the latest traceability-related challenges and best practices.

 

Read More


NEW ProSense Inductive Proximity Sensors from AutomationDirect

PB-44-Automation-ProSenseProximitySensors-400.jpg

AutomationDirect has added a variety of new ProSense inductive proximity sensors to their portfolio. Added are 8mm triple-sensing inductive proximity sensors in flush and non-flush mounting options, which can detect ferrous metals up to a distance of 6mm.

Also new are inductive proximity sensors with a metal face to provide more durable protection, with environmental ratings of IP65/66/67/68 and IP69K. They are available in 8mm, 12mm, 18mm and 30mm barrel sizes, with convenient M8 or M12 quick-disconnect connections.

Read More

 

 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil