Panel Builder System Integrator

PBUS-40-PULS-ACInrushCurrent-400.jpg

June 21, 2022

Probably most of us already have noticed the effect of an AC inrush current in our homes - e.g. when the refrigerator, power tools, vacuum cleaner or the air conditioner turn on. The surrounding lights may dim shortly, a sign that the AC voltage is being drawn down by the switch-on process of this device.

Fortunately, in the home environment, flickering lights are typically the worst condition that occurs. However, in an industrial environment, inrush current has potential risks. It can have a negative impact on operating systems, with unexpected down time or even damage to expensive equipment.

In addition, when selecting other system components such as circuit breakers, switches, relays, etc., the inrush current must always be taken into account. This means the lower the inrush current, the lower the additional effort in terms of system design and maintenance.

But first, let's define what exactly AC inrush current is and why it occurs.

What is AC inrush current for a power supply?

In short, the inrush current is the power surge at the input of a power supply. It occurs during a short time period, when the input capacitors charge up after the input voltage is applied. The inrush current is higher than the nominal or operational current of the power supply.

Therefore, it needs to be limited to ensure a stable operation and to avoid tripping fuses or circuit breakers. There are various technological solutions to achieve a low inrush current.

How can AC inrush current be limited?

In the following, we will explain the four most common methods, that are used to limit the inrush current in industrial power supplies.

 Rating of 4 methods to limit the inrush current in a power supply.

1. Inrush current limitation using NTC thermistors

NTC is short for “Negative Temperature Coefficient”. NTC thermistors are the easiest and the least expensive way of limiting the inrush current. This solution is based on thermally sensitive semiconductor resistors which show a decrease in resistance as temperature increases.

When power is first applied, the NTC thermistor is cold, so it has a high impedance and effectively limits the charging current to the input capacitors. The NTC thermistor heats up very rapidly due to its own losses, so the impedance drops to a low level, allowing all the required current to flow.

This solution also has some disadvantages. The effect of temperature sensitive resistors on the inrush current strongly depends on the ambient temperature.

If it is too cold (e.g. below zero °C), start-up problems can occur. If it is too hot, the inrush current limitation of the NTC thermistors may not work correctly.

Another disadvantage of NTC thermistors is the inadequate inrush current limitation following short AC voltage interruptions: As soon as the AC voltage is interrupted the electrolytic capacitors are discharged. But the NTC thermistor remains at low impedance because it is already heated up. Therefore, the thermistor is practically ineffective when the AC is restored. This effect can damage the capacitors.

NTC thermistors also generate power losses due to its functionality. This can lower the overall efficiency of the power supply.

2. Inrush current limitation using fixed resistors

The inrush current can also be limited with a fixed power resistor. After the electrolytic capacitors on the input of the power supply are charged, the resistor is bypassed.

There are several different components that can be used to bypass the resistor such as relays, triacs or IGBTs.

This method of inrush current limitation is significantly more complex and expensive than the usage of NTC thermistors. Therefore, it is primarily used in power supplies with larger wattage designs (250W and above). The advantages are that fixed resistors work independently from the ambient temperature and cause significantly less power losses.

3. Inrush current limitation using trailing edge phase dimming

Trailing edge phase dimming works similar to the solution with fixed resistors. The limiting path is bridged with a relay after charging the capacitors. What makes this solution special is the limiting part itself.

An electronic system measures the instantaneous value of the AC voltage and compares it with the voltage of the partly charged capacitors. If the difference is less than a set threshold of e.g. 30V, a MOSFET closes. If the difference is bigger than 30V, the MOSFET reopens.

The on-resistance of the MOSFET thereby limits the peak charging current. For example, if the on-resistance has a value of 4 ohms, the current is limited to 7.5A (30V /4 ohms). A gentle start for all input voltages is therefore guaranteed. If the input capacitor is fully charged the inrush current limiting circuit is bridged to avoid power losses.

PULS uses this technique in many of its DIMENSION C series devices.

4. Inrush current limitation using pulse charging of the input capacitor

Pulse charging is a smart and efficient way of softly controlling how much energy is allowed to charge the input capacitor. To achieve this, a little switched-mode power supply is integrated and used as a charging circuit. This enables a very efficient charging of the input capacitor with no losses.

This method leads to a couple of advantages:

  •    -   The inrush current is only slightly higher than the normal operating current.
  •    -   The peak current can be defined more accurately, as there are no variables involved.
  •    -   A delay on the charging is also incorporated into the design. This means when power is initiated or restored, the supply does not contribute to unnecessary inrush as neighboring equipment is also energized.
  •    -   Fuses or circuit breakers can be sized for operating current and not peak current.
  •    -   The inrush current limitation is independent of input voltage or temperature


The pulse charging is highly efficient and is used in many DIN rail power supplies of PULS DIMENSION Q series.

Summary

There are various options to limit the AC inrush current to a point where it is nearly on the same level as the operational current. Each method has its benefits and disadvantages, like temperature sensitivity or a higher price point. Which one is the right for you depends on your application and in which environment it is used. You can also consult PULS' team of skilled application engineers to find the best solution.

Source

Siemens PBSI Sept1 GIF fire test

Changing Scene

  • Prev
EY Canada is pleased to welcome AFARA and its team of multidisciplinary consultants to the firm to ...
Rockwell Automation, Inc. recently announced that Tessa Myers has been named senior vice president, ...
Rittal Systems Ltd. has announced that its valued partner, Tusk Automation Inc. has been named a ...
We often hear that everything old becomes new again, which serves to highlight the importance of ...
Weidmuller Ltd. has signed a distribution partnership with Shelley Automation for the Ontario ...
Carlo Gavazzi (Canada) Inc. of Mississauga, ON, has appointed Dany Lavoie and Brett Horst to its ...
Omron Automation Americas announces RAMP Inc. as a new partner in its Certified System Integrator ...
Skilled tradespeople in British Columbia will benefit from a made-in-B.C. system to support and ...
Rittal Systems Ltd. is pleased to welcome their first Rittal Certified Systems Integrator of ...
Panduit Corp. recently announced the promotion of Marc Naese to Chief Commercial Officer. A ...


EY Canada Acquires Sustainability Consulting Firm, AFARA

EY Canada

EY Canada is pleased to welcome AFARA and its team of multidisciplinary consultants to the firm to deepen existing resources and expertise in sustainability, and environment, social and governance (ESG) services.

“Businesses around the world are now embracing societal change and sustainable development as road maps to long-term success — and we are excited to play a role in that journey,” says Kent Kaufield, Chief Sustainability Officer and ESG Markets Leader at EY Canada. “At the end of the day, sustainability is everybody’s business. With AFARA, we look forward to helping clients build resilient, sustainable companies and economies, while furthering the energy transition.”

Read More


Honeywell Appoints Robin Watson To Board Of Directors

 

Honeywell Robin Watson

Honeywell has recently announced that its board of directors has elected Robin Watson, 55, former Chief Executive Officer (CEO) of John Wood Group PLC, to its board of directors as an independent director.

Watson was appointed CEO of Wood in 2016 after serving as both chief operating officer and an executive member of the Wood Group Board of Directors since 2013. During his tenure as CEO, Watson led the transformation of Wood from an oil field services company to an integrated engineering and consultancy company, spanning a variety of growing end markets in energy and the built environment, with a focus on sustainable technologies. 

Read More


Modern Niagara Partners With Global Sustainability Platform Worldfavor

Modern Niagara

Worldfavor is a global sustainability platform, digitizing and automating the collection, calculation, aggregation and visualization for analysis and reporting of ESG data. Now, Worldfavor is proud to welcome Modern Niagara as a new customer. Modern Niagara is the first Canadian construction company to partner with Worldfavor.

“Worldfavor was founded to be the best platform for sharing, accessing and gaining insights from corporate ESG information. Worldfavor’s mission is to make sustainability mainstream and with that we offer solutions to accelerate sustainability through the value chain. Modern Niagara is the first Canadian construction company to partner with Worldfavor. 

Read More


 

SmartBag Grouping is Live at YVR

SmartBag Grouping

Brock Solutions is happy to announce that SmartBag Grouping has successfully gone live at Vancouver International Airport. SmartBag Grouping provides YVR a tool for managing their Manual Early Bag Storage. The tool uses real-time data and allows users to create groups for baggage based on criteria such as time, flight, and airline. Critical information is delivered to baggage handlers in the field when they need it, on their handheld device, or on an information display.

Baggage is handled more efficiently during loading, and tracking information can be shared with other authorized SmartSuite users. 

 

Read More


 


Just Like Before, Only Better! An International Application by WAGO

WAGO

High-rise buildings in France, tunnels in Switzerland, prestressed concrete ceilings in Germany – one source of their stability is wire products from Kehl in Baden-Württemberg. Badische Drahtwerke GmbH (BDW) supplies reinforcing steel mesh, reinforcement cages, lattice girders and many other rebar and reinforcement products to the region and neighboring countries.

When the machines used to produce lattice girders had to undergo a safety update, the engineers took advantage of the communication capabilities of an intelligent power supply from WAGO to improve process efficiency.

Read More


 

Product News

  • Prev
Tired of guessing a cable bundle’s identity? Deciphering handwritten wire markers? If you’ve got ...
Emerson has introduced the SolaHD SSW Mini-Tower Line-Interactive UPS, a highly economical choice ...
AutomationDirect has added new Fuji Command series pushbuttons, switches, and indicators to expand ...
Create customized, die-cut legend plates with less time, cost and hassle than engraved plates. ...
In the range of safe configurable small controllers PNOZmulti 2 from Pilz, the new standalone base ...
For the modular electronics housings in the ICS series from Phoenix Contact, fillers in depths ...
Control cabinets are undergoing a transformation because the requirements on them – both ...
When it comes to creating test benches, Italian company Advantech Time is breaking new ground and ...
KUKA is introducing two new cobot models: the LBR iisy 11 kg and the LBR iisy 15 kg. Thanks to ...
AutomationDirect has added more color choices for Direct Wire 1kV ALL-FLEX MTW/THHW heavy-duty ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil