Panel Builder System Integrator

PBUS-29-Automation-MultiFunctionSafetyRelays-400.jpgJuly 13, 2021

By Lenny Filipkowski, Product Manager, Industrial Components, AutomationDirect

Many machines and robots require safety circuits to stop all or part of operation in the event of an emergency. Safety circuits are also used to keep all or part of a machine or robot from running while there is human activity in close proximity, either for normal operations or maintenance.

These safety circuits are typically configured using safety relays, or a safety-rated PLC or other safety-rated controller. But in many cases, multi-function safety relays are a better option (Figure 1). A multi-function safety relay is a configurable device with multiple inputs and outputs. It’s more powerful than a single-function safety relay, and less complex and expensive than a safety-rated PLC.

One or more multi-function safety relays can often be used to replace many basic single-function safety relays, simplifying installations and saving money. In other cases, multi-function safety relays can be used instead of a safety-rated PLC, resulting in substantial savings while streamlining implementation and maintenance.

Relays limit options

Multi_Safety_2.JPG

Machine and robot builder OEMs, and end users with similar applications, often have to monitor and control many I/O points that include a relatively small number of I/O points performing safety-related functions.

The most common safety circuit for simple machines with up to three safety inputs (such as an E-stop and two gate switches) is a basic single-function safety relay that has redundant contacts and is self-monitoring. As a machine or robot’s safety system requires more safety inputs, an option is to keep adding basic single-function safety relays, or to possibly go to a much more expensive safety-rated PLC.

Adding basic single-function safety relays to monitor and control the safety I/O often results in overly complex installations involving a relatively large number of relays. If zone control is desired, which requires certain parts of the machine or robot to continue operation for particular types of events, then the number of required safety relays can rapidly multiply, and complexity can grow exponentially.

When many relays are used, troubleshooting can be very difficult as each connection point and component need to be examined to determine the point of failure. Modifications are very difficult to implement as they require rewiring and often the addition of more relays.

In installations with four or more safety I/O points, one or two multi-function relays can often be used to replace four or more basic single-function safety relays, simplifying installations and saving money.

Multi_Safety_3.JPGThe benefits of this approach are listed in Table 1 and described below. Because fewer relays are required, less panel space is needed along with much less wiring. This cuts panel footprint and saves on upfront labor costs.

If changes are required to accommodate modifications to the machine or robot, or to add features, it’s much easier to reconfigure a multi-function safety relay, as opposed to adding more basic single-function safety relays.

Multi-function safety relays are available in a number of styles, including, but not limited to, dual channel monitoring with or without time delay, two-hand control, light curtain monitoring, speed monitoring, motor standstill monitoring, and relay extension to increase the number of output contacts.

These relays come in a wide offering of input and output configurations. A simple base unit can handle a variety of inputs, and expandable input and output modules can be added as needed. Multi-function relays do not need software for configuration or operation, so setup and maintenance is typically very straightforward and simple.

One specific type of multi-function safety relay allows desired functions to be set via a rotational switch at the front of the relay. It is designed to handle a variety of inputs such as E-stops, gate switches, light curtains and/or two-hand buttons—with appropriate outputs to trigger alerts and specific machine or robot operations.

Another type of multi-function relay provides more power through a combination of rotary and DIP switches that are used for initial configuration. This relay type typically can accommodate a much higher number of I/O, up to 24 inputs and 24 outputs, by utilizing separate input and output modules.

Multi_Safety_4.JPG

A system with an E-stop and two safety light curtains would require three single-function safety relays. Figure 2 shows the same system with a safety circuit consisting of just one multi-function relay, greatly simplifying the circuit while cutting costs and adding flexibility.

Simpler than a PLC

For zone control and other complex safety circuits, another solution is to use a safety-rated PLC to control and monitor just the safety I/O, or even all of the I/O, but this can be very expensive and can add unnecessary complexity.

Adding a separate safety-rated PLC in addition to the main controller requires the OEM to purchase, program and maintain a second programmable system in addition to the main controller. This safety-rated PLC will need its own programming software, with consequent renewal fees. The learning curve for a safety-rated PLC can be steep, and costs are relatively high.

Alternatively, one safety-rated PLC can be used to perform all required control and safety functions. This eliminates the problem of two separate systems, but it increases costs significantly, and generally only makes sense when a very large percentage of the machine or robot I/O is directly related to safety.

Multi_Safety_5.JPG

One or more multi-function relays can often be used to perform all safety-related functions for a machine or robot, resulting in substantial savings while simplifying implementation and maintenance as compared to a safety-rated PLC. The benefits of this solution are listed in Table 2 and described in detail below.

It’s typically much easier to configure a multi-function safety relay than it is to program a safety-rated PLC. There’s no need to purchase, update and maintain programming software, and a programming PC isn’t required.

A multi-function safety relay is easily integrated into the main control system by simply hard-wiring a few I/O points between the relay and the controller.

Because a multi-function safety relay is much less expensive than a safety-rated PLC, it often can be used to cost-effectively handle all of the safety-related I/O, obviating the need to upgrade the main controller to one that’s safety-rated.

Caveats and considerations

Very simple applications are often best served by one or two single-function safety relays and don’t require the added expense of multi-function relays. A machine, robot or other system that may only have an E-stop along with a set of light curtains or door switches is an example of an application where a single-function safety relay would be the best choice.

Multi-function relays do have their limitations and can only be expanded to a certain practical limit in terms of the total number of I/O points and complexity of function. Cost and particularly complexity can increase to a point where it makes sense to use a safety-rated PLC.

Very complex applications with many safety I/O points and multiple zone control, or applications with requirements that change substantially from machine to machine or over time, may be better served by using a safety-rated PLC, either for just the safety I/O or for all of the I/O.

Multi-function relays result in savings

Multi_Safety_6.JPG

A manufacturer of limit switches upgraded to a multi-function safety relay system for its production cell to accommodate increased automation of the processes used in the construction of its products (Figure 3).

The original safety circuit design was mostly manual, and thus required substantial operator interaction. The circuit had an E-stop, one set of safety light curtains, and door switches.

The newer automated production system required the addition of light curtain, door switches and safety mats at different locations within the production process. Different interlocking requirements such as speed monitoring of some of the equipment were also needed.

By automating the production process, the manufacturer was able to relocate eight employees to different functions in the company, and to increase production by 40%.

By switching to a multi-function safety relay instead of adding more single-function safety relays, the company saved 30% of the initial cost, and gained a much more flexible safety system.

The manufacturer did look at adding a safety-rated PLC, but the cost would have been more than 60% higher than the multi-function relay system, and the complexity of having to support such a system was not justifiable.

Conclusion

Machines and robots with just a couple of basic safety inputs such as an E-stop and one or two door switches or other safety-related inputs are typically best served by a safety system with one or two single-function safety relays.

When a machine has many I/O points, with a high proportion safety-related, a safety-rated PLC is often the best fit.

But for a machine or robot in between these two extremes, an easy to configure and inexpensive safety system using multi-function relays may be the preferred choice.

Source

AutomationDirect_Link_Logo.JPG

Multi_Safety_7.JPG

Siemens PBSI Sept1 GIF fire test

Changing Scene

  • Prev
EY Canada is pleased to welcome AFARA and its team of multidisciplinary consultants to the firm to ...
Rockwell Automation, Inc. recently announced that Tessa Myers has been named senior vice president, ...
Rittal Systems Ltd. has announced that its valued partner, Tusk Automation Inc. has been named a ...
We often hear that everything old becomes new again, which serves to highlight the importance of ...
Weidmuller Ltd. has signed a distribution partnership with Shelley Automation for the Ontario ...
Carlo Gavazzi (Canada) Inc. of Mississauga, ON, has appointed Dany Lavoie and Brett Horst to its ...
Omron Automation Americas announces RAMP Inc. as a new partner in its Certified System Integrator ...
Skilled tradespeople in British Columbia will benefit from a made-in-B.C. system to support and ...
Rittal Systems Ltd. is pleased to welcome their first Rittal Certified Systems Integrator of ...
Panduit Corp. recently announced the promotion of Marc Naese to Chief Commercial Officer. A ...


EY Canada Acquires Sustainability Consulting Firm, AFARA

EY Canada

EY Canada is pleased to welcome AFARA and its team of multidisciplinary consultants to the firm to deepen existing resources and expertise in sustainability, and environment, social and governance (ESG) services.

“Businesses around the world are now embracing societal change and sustainable development as road maps to long-term success — and we are excited to play a role in that journey,” says Kent Kaufield, Chief Sustainability Officer and ESG Markets Leader at EY Canada. “At the end of the day, sustainability is everybody’s business. With AFARA, we look forward to helping clients build resilient, sustainable companies and economies, while furthering the energy transition.”

Read More


Honeywell Appoints Robin Watson To Board Of Directors

 

Honeywell Robin Watson

Honeywell has recently announced that its board of directors has elected Robin Watson, 55, former Chief Executive Officer (CEO) of John Wood Group PLC, to its board of directors as an independent director.

Watson was appointed CEO of Wood in 2016 after serving as both chief operating officer and an executive member of the Wood Group Board of Directors since 2013. During his tenure as CEO, Watson led the transformation of Wood from an oil field services company to an integrated engineering and consultancy company, spanning a variety of growing end markets in energy and the built environment, with a focus on sustainable technologies. 

Read More


Modern Niagara Partners With Global Sustainability Platform Worldfavor

Modern Niagara

Worldfavor is a global sustainability platform, digitizing and automating the collection, calculation, aggregation and visualization for analysis and reporting of ESG data. Now, Worldfavor is proud to welcome Modern Niagara as a new customer. Modern Niagara is the first Canadian construction company to partner with Worldfavor.

“Worldfavor was founded to be the best platform for sharing, accessing and gaining insights from corporate ESG information. Worldfavor’s mission is to make sustainability mainstream and with that we offer solutions to accelerate sustainability through the value chain. Modern Niagara is the first Canadian construction company to partner with Worldfavor. 

Read More


 

SmartBag Grouping is Live at YVR

SmartBag Grouping

Brock Solutions is happy to announce that SmartBag Grouping has successfully gone live at Vancouver International Airport. SmartBag Grouping provides YVR a tool for managing their Manual Early Bag Storage. The tool uses real-time data and allows users to create groups for baggage based on criteria such as time, flight, and airline. Critical information is delivered to baggage handlers in the field when they need it, on their handheld device, or on an information display.

Baggage is handled more efficiently during loading, and tracking information can be shared with other authorized SmartSuite users. 

 

Read More


 


Just Like Before, Only Better! An International Application by WAGO

WAGO

High-rise buildings in France, tunnels in Switzerland, prestressed concrete ceilings in Germany – one source of their stability is wire products from Kehl in Baden-Württemberg. Badische Drahtwerke GmbH (BDW) supplies reinforcing steel mesh, reinforcement cages, lattice girders and many other rebar and reinforcement products to the region and neighboring countries.

When the machines used to produce lattice girders had to undergo a safety update, the engineers took advantage of the communication capabilities of an intelligent power supply from WAGO to improve process efficiency.

Read More


 

Product News

  • Prev
Tired of guessing a cable bundle’s identity? Deciphering handwritten wire markers? If you’ve got ...
Emerson has introduced the SolaHD SSW Mini-Tower Line-Interactive UPS, a highly economical choice ...
AutomationDirect has added new Fuji Command series pushbuttons, switches, and indicators to expand ...
Create customized, die-cut legend plates with less time, cost and hassle than engraved plates. ...
In the range of safe configurable small controllers PNOZmulti 2 from Pilz, the new standalone base ...
For the modular electronics housings in the ICS series from Phoenix Contact, fillers in depths ...
Control cabinets are undergoing a transformation because the requirements on them – both ...
When it comes to creating test benches, Italian company Advantech Time is breaking new ground and ...
KUKA is introducing two new cobot models: the LBR iisy 11 kg and the LBR iisy 15 kg. Thanks to ...
AutomationDirect has added more color choices for Direct Wire 1kV ALL-FLEX MTW/THHW heavy-duty ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil