Panel Builder System Integrator

March 23, 2021

By Doan Chau, Technical Consultant, Life Sciences Industry

In the life sciences industry, quality is everything. But batch record review is a painstaking process if your company relies on exhaustive paper records – or a combination of paper and electronic records.

Large quality teams must comb through batch records to confirm good documentation practices (GDP) and initiate incident investigations when deviations are uncovered.

And because a myriad of issues can impact quality, following the paper trail to reach resolution can take weeks. Meanwhile, quarantined product waits for release, delaying availability to patients.

Today there’s a better way. An increasing number of life sciences companies are turning to manufacturing execution systems (MES) to reduce quality issues, accelerate resolution and improve operations.

Right from the Start

With MES software, you can create a holistic electronic batch record (EBR) that not only documents the process, but also guides each step to minimize quality issues at the onset.

We all know that following standard operating procedures (SOPs) is critical to maintaining product quality. But especially with manual operations, deviations from paper-based SOPs can easily occur despite the best intentions. 

What happens when an operator misreads a barcode during a material addition step, enters an incorrect temperature setpoint, accidentally flips the page and moves on to the wrong step – or inadvertently uses uncalibrated equipment?

In some cases, the answer could be the loss of an entire batch.

An MES leverages the power of its EBR to add electronic guardrails that keep procedures on track – and reduce documentation and procedural errors by 50-80%.

How? Here are just a few examples. The MES can require barcode scans to electronically verify material additions and incorporate input limits to prevent inaccurate manual entries. The system shows your operators exactly where they are in the process – and only allows them to proceed per recipe design.

To enforce the use of the right equipment, the system could utilize barcode scans and access data from other systems to obtain maintenance, calibration and hygienic state data. Then, it electronically records the use in the electronic equipment logbook and EBR without the risk of manual data entry errors or omissions.

Accelerating Issue Resolution

Despite the guardrails provided by an MES, issues can occur. The cause might be as simple as an operator adding the incorrect amount of a substance during a manual addition. Or as complex as raw material variability reported by a supplier.

A robust MES helps you achieve resolution of these issues faster in two important ways.

First, the system enables “review by exception.” An EBR eliminates the time-intensive line-by-line confirmation of manual data entries. Instead, quality reviewers can focus on critical process exceptions – like an out-of-specification production reading that may directly affect the quality of the product.

The MES can identify these exceptions as they occur and report them to the right people via a dashboard to enable real-time correction and optimization.  

Second, the system delivers complete genealogy and traceability. When a deviation does occur, the MES allows you to quickly identify all batches, lots and raw materials that were impacted. Root cause analysis investigation time can be reduced by as much as 30%, because the system tracks each step in the process – and all production-relevant resources including material, equipment and personnel.

Better Quality. Better Operations.

A holistic MES is designed to help you run and monitor your operations in real time. And it also provides richly contextualized data that’s ripe for analysis.

Because the system provides so much context around a specific batch including the product, materials and equipment used, even a manual analysis can quickly uncover insights into your process.

For example, MES data can show you how many deviations occurred in a specific time frame and which step of the process had the highest occurrence. This can lead to not only insights, but actions that can reduce impacts to quality – like adding electronic verification for a manual step or updating operator training. 

Taking it a step further, analytics tools can help you correlate MES data with information from other systems. For example, adding data, such as temperature, humidity or particulate counts from your building management system, can help determine if environmental factors had an impact – guiding you to the root cause of the issue.    

Extending Gains and Keeping It “Evergreen”

While an MES can significantly improve operations in a specific production facility, you can extend those gains by applying a common MES across your manufacturing footprint.

Oftentimes, a company’s production facilities have evolved over time – each in their own unique way. Some were established decades ago. Others are the product of mergers and acquisitions.

Regardless of the cause, the result is even plants within the same parent company can operate very independently.

An enterprise MES delivers a holistic view across all your production sites, leading to larger datasets, more robust insights – and more ways to make improvements. Because procedures and recipes can be shared, improvements identified at one site can be applied companywide.

And when you choose an MES that takes an “evergreen” approach to system upgrades, you can cost-effectively maintain your continuous improvement momentum.

Unlike many MES solutions, an evergreen MES allows you to incrementally upgrade the core functionality of your system, while preserving the master data and batch records of your sites. The result? Your system stays up-to-date without the cost of additional customization and new recipe validation.

Source

Changing Scene

  • Prev
Recently, EY Canada welcomed SuMO IT Solutions — an enterprise service and operations management ...
Recently, Siemens Mobility was pleased to announce that it is acquiring RailTerm, a Canadian based ...
ATS Automation Tooling Systems Inc., a major automation solutions provider, recently announced the ...
Recently, Phoenix Contact Canada Ltd. was proud to announce and welcome Robert Kostash, P. Eng., as ...
The technology enables rapid prototyping of vehicle tires through precise laser material ...
Lakeside was recently excited to announce the opening of a new service center and office located at ...
EPLAN offers a variety of training courses to help you further your knowledge and make you a better ...
Littelfuse, Inc. recently announced it has acquired Hartland Controls. Headquartered in ...
Rittal Systems Ltd. (Rittal Canada) was recently pleased to introduce their new experienced ...
Power management company Eaton recently announced it has signed an agreement to acquire Tripp Lite, ...


ATS Acquires Industrial Automation System Integrator CIM

ATS Acquires CIMATS Automation Tooling Systems Inc., a major automation solutions provider, recently announced the acquisition of Control and Information Management Ltd., an industrial automation system integrator based in Ireland. The financial terms of the transaction were not disclosed.

With the acquisition of CIM, ATS adds to its automation and service capabilities for biopharma, pharmaceutical, and other manufacturing and services industries and enhances its digitization strategy. CIM will operate as part of ATS’ Process Automation Solutions (“PA”) business which is an independent provider of complete automation solutions for the process and manufacturing industries.

Read More


 

Pipeline Hack Raises Questions and Concerns: How Secure is your OT Network? - JMP Solutions

JMP SolutionsHow secure is your industrial network? Do you have shared passwords? While working on OT related networks, can you access the internet and your email?

If you have been following the news and happen to work in a process or manufacturing facility, you are probably thinking about how secure your environment is, and if it is at risk for critical production halting threats.  Whether your company manufactures cars, packages food products, or provides an essential resource or goods to society, an attack could be crippling to not only your business but the population who may very well rely on the goods that you produce. 

Read More

UCEC Identifies What Makes Them a Top Notch Control Panel Builder

PBUS-27-UCEC-TopNotchPanelBuilder-400.jpg

UCEC has existed for more than sixty years by building the best control panels, period. To keep their focus on quality custom panels, they have never defined themselves as a “one-stop shop." To be all things to all people with something as complicated as a control panel should send up a red flag. When panels shops try to do everything (a “one-stop shop”), that’s when things get diluted and messy.

There is so much talent and work that goes into a UCEC panel. UCEC knows their industry thoroughly, and they wish to remain highly relevant in the field. No one gets there by being all things to all people. UCEC shares two examples of this philosophy in action.

PARTNERING WITH EXPERTS TO SERVE CLIENTS BETTER

UCEC's talented craftsmen contribute their years of knowledge of panel building to each project. Conversely, most engineering firms who try to build panels quickly learn there is more to them than meets the eye. As UCEC's President and CEO, Mark Inboden said, “Two specialized companies collaborating to solve a customer’s problem often leads to a better result for the end user.”

UCEC finds that the best results happen for their clients when they partner with other experts and this case study demonstrates exactly that.

Read More


 

Product News

  • Prev
New ProSense multi-mode and off-delay timer relays offer the flexible programmability of a ...
Using B&R automation technology in maritime environments is now easier and more flexible than ...
As the manufacturing industry evolves and changes, there are often space constraints for installing ...
AutomationDirect has added Quabbin 600V control cable to their extensive selection of cable ...
Industrial companies can now implement CIP Security expansively in their systems with the  ...
Electromate Inc., a Canadian Distributor of Precision Robotic & Mechatronic Solutions, has ...
The safety functions of the B&R ACOPOS P3 servo drive are now also available for motors with a ...
For their next meeting with an OEM or system integrator, can panel builders simply grab their ...
The PTV terminal blocks with lateral conductor connection from Phoenix Contact enable clear wiring ...
Flexible manufacturing doesn't have to mean implementing advanced technologies like the Omron LD ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil