Panel Builder System Integrator

Oct 7, 2020

bittronics 400By: Owen Hurst

Recently, Panel Builder & Systems Integrator had the opportunity to speak with Bitronics, a NovaTech company, that is focused on delivering power measurement, process control, and substation automation.

On this occasion we focused on power measurement tools designed for a variety of end-use applications, including the utility sector that is increasingly automating and relying on control infrastructure.

As this sector increases its focus on automation and control, Bitronics has devoted itself to delivering products that will aid in driving a focus on automated power measurement and control. The implementation of control panels and infrastructure is a big next step for utilities and is expanding the need and focus of panel builders and integrators.

We asked a little about the type of products they offer and how Bitronics Power measurement products differed from traditional control components?

“First off, we work primarily with 3-phase electricity with a core product focus on SCADA Meters, SCADA and Automation transducers, Event Recorders and Distribution Grid Monitors. However, when discussing automating substations one of the most unique products is the digital fault recorder.”

In some ways Bitronics Digital Fault Recorder is like a relay in the sense that it will feed data into a SCADA system. However, there are some additional features that, when utilizing new control products from Bitronics, have enhanced capabilities.

We will discuss these further, but first need to lay the context for why advanced recording and control is important.

Let us look back to the 2003 blackout. At the time, the North American Reliability Corporation (NERC) had to go out and do forensic analysis of the issue. With technology today, the need to take time and manpower to do physical forensic analysis has been eliminated. Best practices, now and moving forward, will be for substations to have control panels with components capable of recording and capturing data as well as maintaining awareness of component operations for advanced maintenance notification.

Based on former events NERC has taken a proactive approach to control infrastructure and disturbance monitoring equipment by implementing requirements for Dynamic Disturbance Recording (DDR), Fault Recording (FR) and Sequence of Events Recording (SOER). These are outlined in Requirements R1 through R5 and depending on the substation require companies to identify Bus Locations, Notification of Recorders in place, SOER, FR and require under R1 a 5-year assessment.

Recognizing the importance of control panel components in substation operation, we can return to the Bitronics and their unique control solutions that meet these requirements.

Bitronics recorders do more than a standard relay in delivering information. They can identify the type of disturbance and are equipped with sufficient capacity to keep dynamic disturbance recording for 10 days. This makes it extremely easy for NERC to gain information about incidents. And further, rather than require a data dump, the recorders are capable of delivering data within an identified time-frame. Again, providing detailed data of the incident without requiring someone to sift through all recorded data, particularly since the recorders are recording up to 30 points of data a second.

While we know that the Bitronics recorders meet NERC standards the question now becomes location, which is why one of the requirements is for substation operators to identify Bus locations. Locations is important but perhaps not easily standardized. In new substation builds this is more easily addressed, however when implementing new recording devices in existing substations there may be limits on available locations.

Bitronics recorders are not much different in size to a traditional relay, and in the end may only need to monitor one or two buses to gain the data needed. It is small enough that it can easily be placed in a panel or hung directly off CT’s and will not interfere with relays or other protection equipment. Essentially, once put in place, it’s only needed in the event that an incident has occurred and data is required.

The direction taken by Bitronics Power Measurement products are truly focused on the pushing forward more intelligent control infrastructure in power monitoring and control and will be a big part of the continued automation of substations throughout the US. A direction that is going to see more panel builders and integrators expanding their industries served.

Changing Scene

  • Prev
Schneider Electric is introducing a personalized digital experience for logged in customers ...
Littelfuse, Inc., an industrial technology manufacturing company empowering a sustainable, ...
The international FRABA Group has announced the creation of two new business units: UBITO and ...
Recently, EY Canada welcomed SuMO IT Solutions — an enterprise service and operations management ...
Recently, Siemens Mobility was pleased to announce that it is acquiring RailTerm, a Canadian based ...
ATS Automation Tooling Systems Inc., a major automation solutions provider, recently announced the ...
Recently, Phoenix Contact Canada Ltd. was proud to announce and welcome Robert Kostash, P. Eng., as ...
The technology enables rapid prototyping of vehicle tires through precise laser material ...
Lakeside was recently excited to announce the opening of a new service center and office located at ...
EPLAN offers a variety of training courses to help you further your knowledge and make you a better ...


ATS Acquires Industrial Automation System Integrator CIM

Conrad OakeyNovaTech, a medium-sized provider of automation and engineering solutions serving electric utilities and process manufacturing industries for 40 years, recently announced the appointment of Conrad Oakey as their Chief Executive Officer.


Oakey, who originally joined NovaTech in 2000, includes among his many accomplishments consolidating the management of the two business units (power and process automation), simplifying online ordering and customer support, as well as continuing to improve the functionality and ease-of-implementation of the company’s three product lines.

Read More


 

The Automated Future of Material Removal

The Automated Future of Material RemovalAutomating a deburring or surface finishing application is a smart, responsible, and effective way to improve a manufacturing process. There is a serious need for the automation of manual material removal and deburring tasks to help improve employees’ health, combat manufacturing labor shortages, and increase product consistency and quality.

The historical roadblocks for automated material removal are melting away as return on investment gets faster, more integrators and manufacturers cultivate hands-on experience, and technology advances to make processes easier.

Read More


When To Use Multi-Function Safety Relays

Multi-Function Safety RelaysBy Lenny Filipkowski, Product Manager, Industrial Components, AutomationDirect

Many machines and robots require safety circuits to stop all or part of operation in the event of an emergency. Safety circuits are also used to keep all or part of a machine or robot from running while there is human activity in close proximity, either for normal operations or maintenance.

These safety circuits are typically configured using safety relays, or a safety-rated PLC or other safety-rated controller. But in many cases, multi-function safety relays are a better option (Figure 1). A multi-function safety relay is a configurable device with multiple inputs and outputs.

Read More

 


 

Williams Advanced Engineering, Aerofoil Energy and Inovo Join Forces on New Robotic Test Programme to Improve Supermarket Fridge Efficiency

Williams Advanced EngineeringWilliams Advanced Engineering (WAE), Aerofoil Energy and Inovo Robotics are working together on an innovative new R&D programme that uses robots to further improve the energy efficiency of supermarket fridges.

Based at WAE’s site in Grove, Oxfordshire, the pioneering new initiative sees Inovo’s collaborative robots – called ‘cobots’ – repeatedly opening and closing the doors of test fridges to emulate real-world supermarket trading conditions. These fridges feature the revolutionary F1-inspired Aerofoil shelf edge technology along with Aerofoil Energy’s new “Vortex” energy efficient fridge technologies.

 

Read More


 

Product News

  • Prev
B&R has added three new option boards for its X90 product line. With the new boards, it is now ...
Machine designers can save time and costs, optimize machine performance, and get to market faster ...
Sealcon has many unique cable glands but maybe none more unique than the BXA/BXI fitting. Why ...
With the TERMITRAB complete product family from Phoenix Contact, they provide you with the ...
The STEP POWER power supply family from Phoenix Contact has been extended to include new devices ...
The LEMO B Series offers a modular, ergonomic, rugged and reliable circular multipole connector for ...
Moxa Inc., a provider in industrial communications and networking with a focus on securing ...
The PTVME test-disconnect terminal blocks from Phoenix Contact are an extension to the PTV ...
Introducing the Type 4 4X mild steel and stainless steel consolet series, which serves as an ...
With a new bus controller, B&R has added a gate measurement module to its portfolio for ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil