Panel Builder System Integrator

 August 20th, 2021

Siemens Built In Isolation Products 400

By Alyssa Kerslake

Life safety today is top of mind for nearly everyone. There is a certain level of trust that fire alarm systems continue to work within a fire incident. With system survivability being a key concern to regulators, building managers, and the public, Siemens has developed systems that are designed to meet and exceed regulations that protect people, property, and assets. 

One of the most significant concerns, particularly in a large multi-story building, is implementing a secure and fully functional fire alarm system. Today, it is not uncommon to have power and data for hundreds of fire alarm devices connected over a single pair of wires. The concern is, if a fault occurs somewhere between the devices, the zone and location of the device may no longer be known, or the operation of that circuit reduced or possibly impaired. These scenarios could allow an undetected catastrophic event to develop within the space due to inoperable life safety devices. 

ISOtechnologyTM eliminates this concern by utilizing Fault Detection and built-in Isolation in each fire alarm device (i.e., detector, manual station, I/O modules, etc.). It identifies when a fault has occurred, reports the type of fault, and isolates as required. ISOtechnologyTM allows other devices on a common Data Communication Link (DCL) loop to operate when a fault occurs. Fault Isolation is one of the key requirements under the National Building Code and CAN/ULC-S524, and Siemens is the first major manufacturer to provide a system with built-in isolation in all major devices.

ISOtechnologyTM has proven to be reliable and secure, but the benefits go well beyond peace of mind concerning operational efficiency. ISOtechnologyTM is also extremely easy to install as it utilizes fewer devices, includes pinpoint wire-to-wire short identification, and can be added into existing Siemens various Control Units. 

To learn more about ISOtechnologyTM, we spoke with Jeffry Tondang, Product Manager at Siemens Canada. 

Q: What are the benefits of having built-in isolation in Fire Alarm devices?

With built-in isolation in fire alarm devices such as smoke/heat detectors, manual stations, input/output modules, the traditional isolator-only devices are no longer needed, and this comes with several benefits. For example, less engineering work, fewer devices (no isolator-only devices, backboxes, wiring, and associated labor) This would provide lower system life-cycle costs over the life of the system with savings in operational and maintenance costs.

Q: How is troubleshooting time decreased with ISOtechnologyTM?

When a fault happens, i.e., wire-to-wire short, short and ground, or short and open, the ISOtechnologyTM allows a technician to locate where the disconnect location is. The location, which is between two devices, will be made available at the control unit. Therefore, the technician can now concentrate on troubleshooting only between these two points. It removes the laborious and time-consuming process of elimination method, checking between one device to another. 

Q: Can the whole system still run efficiently if one fault, i.e., wire-to-wire short applied to the circuit? 

Yes. By setting all the ISOtechnologyTM devices as isolators, the system survivability is increased. Therefore, a single fault will not affect the operation of the fire alarm system at all.

Traditional System 400Image 1: A traditional fire alarm system with isolators.

System ISOTechnology 400

Image 2: A fire alarm system with built-in isolation “ISOtechnologyTM"

Q: How does pin-point wire-to-wire short identification reduce service time? 

When a wire-to-wire short happens within a wiring loop, the two devices adjacent to the short location on the wires will isolate themselves. These devices and location will be made known at the control unit. Then the technician will know where to begin troubleshooting efforts instead of searching for some time to find the location of the short.

Q: How would one go about expanding their already existing Siemens system?

This depends on the current system in the field, and there could be variations on how we could approach it. For example, if the system installed is an addressable legacy system, we will look for the most efficient way to migrate the head-end (or the control unit) then moving on to the devices as the field is ready. The process is much simpler for our most current fire alarm systems (i.e., earlier version without ISOtechnologyTM). The best way to find out how is by contacting our Branches or Partners in the area for solutions to your specific site design. 

Panel Isolation Compatibility on All Siemens SystemsTraditional vs ISOtechnology components

Image 3: a traditional device in comparison to Siemens ISOtechnology devices with built-in isolation. Each of these devices are compatible with Modular, Compact, or 50 Point panels.

Q: How can end-users rest assured that they have a reliable system that has increased system survivability?

With built-in isolation, each device can be set or configured as an isolator, which is above and beyond the regulatory requirement. The code requires that each fire zone (i.e., 1 floor area) be isolated so that a fault within one floor area cannot affect normal operation of devices in another area. In other words, if a single fault happens on that floor, it is understandable if that floor is gone or no longer visible to the system, as long as devices on other floors are working normally. By setting all devices on that floor as isolator, if a single wire-to-wire short or open or ground happens between devices, all the devices on that floor are still working normally and communication to the control unit is still maintained, even when one portion of wiring in that floor is disabled. Therefore, the floor where the fault happened is still protected! Here is another additional benefit: when a zone or floor is no longer supervised by a fire alarm system, a Fire Watch (which could be costly) is required. With ISOtechnologyTM, owners of the property could avoid the unnecessary Fire Watch.

Survivability above and beyondISOtechnology improves system survivability

Image 5: ISOtechnologyTM provides virtual circuit survivability and a short in one zone does not affect another zone or impede normal system operation. When the system remains fully operational when a single fault is applied, you increase life safety guaranteeing an alarm is always received at the fire alarm control panel.

Image 6: with all these elements in place, installers and end-users can rest assured that they have a reliable system that has increased system survivability. 

Implementing a secure and effective fire alarm system is one of the most important considerations for large multi-story buildings, and Siemens recognizes the importance of security and safety that comes with that. With ISOtechnology TM providing fault detection and built-in solation, the system’s overall safety and reliability is improved, especially in case of emergency. Users benefit from ISOtechnology TM since it not only enhances the safety system, but it also saves users’ time and money. 

 

 

 

For more information on ISOtechnologyTM, click here:
https://www.youtube.com/watch?v=QcE22WsLcP8

To discuss adding ISOtechnologyTM to your system with a Siemens Branch or Partner in your area, click here: 
https://new.siemens.com/us/en/company/distributorlocator.html

 

Alyssa Kerslake is an Associate Editor with Kerrwil Publications 

Robots are an integral part of the manufacturing industry worldwide to the extent that they are indispensable. In production, robots and cobots frequently encounter each other, working and interacting side by side with humans, but also performing tasks independently.      

ASK RITTAL SERIES
Episode 1 - A-Z of Busbar

ASkRittalBusbar_300__250_px_2.png

What are the advantages to using busbars in your panels?

The busbar is a very efficient part in the electrical panel that collects and transmits electrical energy as a conductor.  This conductor can pass very large currents.

Busbar allows for: 

  •    -   Reductions in the use of space relative to the panel and enclosure           (reduction in the amount of wiring). So, more equipment and parts             can be used in a panel.
  •    -   Easy troubleshooting in the event of switchgear interruption or                   failure.
  •    -   Time savings during both installation, maintenance, or upgrades               (ex.busbars are mostly used for branching inside panels, and,                   branching will be done by holes and bolts without using terminals).
  •    -   Integration of supplemental panel or enclosure elements to enhance or augment performance
  •    -   High electrical and mechanical strength. They last longer and don’t require regular replacement. They distribute power             more efficiently. Thus, reducing energy consumption.
  •    -   They’re also easily adaptable for renewable energy integration while offering extreme versatility for easy consumption                for many purposes.

Download the Recording Here

Changing Scene

  • Prev
Sonepar has announced that its wholly-owned Canadian subsidiary, Sonepar Canada, Inc. has acquired ...
EY Canada is pleased to welcome AFARA and its team of multidisciplinary consultants to the firm to ...
Rockwell Automation, Inc. recently announced that Tessa Myers has been named senior vice president, ...
Rittal Systems Ltd. has announced that its valued partner, Tusk Automation Inc. has been named a ...
We often hear that everything old becomes new again, which serves to highlight the importance of ...
Weidmuller Ltd. has signed a distribution partnership with Shelley Automation for the Ontario ...
Carlo Gavazzi (Canada) Inc. of Mississauga, ON, has appointed Dany Lavoie and Brett Horst to its ...
Omron Automation Americas announces RAMP Inc. as a new partner in its Certified System Integrator ...
Skilled tradespeople in British Columbia will benefit from a made-in-B.C. system to support and ...
Rittal Systems Ltd. is pleased to welcome their first Rittal Certified Systems Integrator of ...


Sonepar Acquires Aztec Electrical Supply Inc.

Sonepar Acquires Aztec

Sonepar has announced that its wholly-owned Canadian subsidiary, Sonepar Canada, Inc. has acquired Aztec Electrical Supply Inc. With a strong presence in the province of Ontario, the acquisition of Aztec will strengthen Sonepar’s ability to grow their industrial business model across the Greater Toronto Area.

Founded in 2002, Aztec expanded its market presence across Ontario opening four branches located within Vaughan, Cambridge, Mississauga, and Burlington. Aztec will add over 100 associates to the Sonepar network in Canada and is expected to record sales revenues of over $70 million in 2022.

Read More


Omron Announces REVTECH as Certified Systems Integrator Partner

 

Omron Partners with REVTECH

Omron Automation Americas recently announced REVTECH as a new partner in its Certified Systems Integrator program. Based near Quebec City, REVTECH has been providing robotic and automation solutions for companies of various sizes across industries.

REVTECH’s determination is unmatched when it comes to providing their customers with the industry’s most high-performing yet easy-to-use systems. The company focuses on production improvement, ROI, and easy technological transfer to users. They recently designed, built, and implemented a complex, multi-robot production cell using Omron robots, Sysmac control, and high-resolution FH vision, all in a safe package for the user.

Read More


For a Multiplied Value Unified

PB-62-Excelpro-MultipliedValue-400.jpg

During the last few years, the Excelpro Group has welcomed AIA Automation, Envitech Automation and Conrad Lavoie Electrical, all of which have become ‘Member of the Excelpro Group’.

It is with great excitement that Excelpro announced that these three companies officially became Excelpro.

This decision is part of a strategy to enhance the Excelpro Group’s brand in its market.

These companies already collaborate on various client projects. This merger brings together the complementary strengths of the employees and ensures a global synergy of the activities throughout the Group.

Read More


 

Latest Articles

  • Prev
Robots are an integral part of the manufacturing industry worldwide to the extent that they are ...
The way we generate power has been undergoing a radical shift over the last few years as our ...
Industry is facing tremendous challenges. Therefore, industry needs a digital ...
The new Eplan Platform 2023 is streamlining and accelerating project planning with new cloud-based ...
Brock Solutions is happy to announce that SmartBag Grouping has successfully gone live at Vancouver ...
From cloud software to online tutorials and much more: EPLAN users can find many useful solutions ...
Rittal Systems Ltd. was recently pleased to announce that E B Horsman & Son, one of ...
The test of global change has exposed the brittle nature of systems, processes, and supply chain ...
This May 17th all-day event is focused on North America and supported by Siemens’ Integrated ...
Preparing industrial products for safe use in hazardous applications or potentially hazardous ...

Sponsored Content

Brady: Raised Panel Labels (B-593)

PB-BradyRaisedPanelsB593-200.jpg

Create customized, die-cut legend plates with less time, cost and hassle than engraved plates.

Brady's B-593 material is a high-gloss polyester label with a thick, raised profile (foam-backed) and an ultra-aggressive permanent adhesive. Designed as a high-performance low-cost alternative to engraved plates and push-button labels on panels and enclosures.

These labels are ideal for a variety of indoor and outdoor applications.

Find out more HERE.


Your Weekly Product Questions Answered by Brady

How was the 10-year durability calculated? 
Brady uses our own in-house weathering test equipment, we can simulate 10 years of outdoor exposure.


 

Q&A With HELU: Robotic Dress Packs

HELU Robotic Systems

Robots are an integral part of the manufacturing industry worldwide to the extent that they are indispensable. In production, robots and cobots frequently encounter each other, working and interacting side by side with humans, but also performing tasks independently.

The latest industrial robots move in a three-dimensional space and can therefore perform a wide variety of tasks. In order to ensure optimum system performance, the use of a dress pack is required to keep a robot running as frequently as possible. Regional Sales Manager Gordon Post discusses some of the questions he hears in the field about robotic cable protection systems.

Read More


 


Can A Cobot Help Your End-of-Line Operations?

Cobot

 

If you’re challenged with labor issues in your packaging and palletizing area, you’re not alone.  These applications are often tedious and can lead to repetitive motion injuries. In a tight job market it’s especially difficult to fill jobs that people consider dull and strenuous. Now more than ever, companies are looking for automation solutions that will allow them to resolve labor issues and increase their flexibility to quickly adapt to market demands.

Can a cobot help your end-of-line operations?   Here are a few areas to consider:

Case Erecting - Some companies have very limited space or they have "odd ball" box sizes that can’t be erected with a traditional case erector.

Read More

 


 

How To Correctly Measure the Efficiency of a Power Supply

Efficiency of a Power Supply

Manufacturers' data sheets often only give blanket information on efficiency and power losses of their power supplies at different mains voltages or loads. Therefore, it is advisable for users to measure the efficiency of a power supply themselves. In this blog article you will learn what you should pay attention to.

Multimeter, wattmeter, or power analyzer – which is the (measurement) tool of choice? 

There are several measuring instruments which are used for the determination of efficiency. Nevertheless, the measurement tolerances and the capabilities of measuring instruments in measuring various signals (AC or DC) varies considerably.

Read More

What Does Daisy Chaining Mean for Power Supplies?

PBUS-45-PULS-DaisyChaining-400.jpg

Daisy chaining refers to a wiring scheme in which several devices, such as power supplies, are connected directly in series. This type of wiring is also referred to as "looping through". The English term “Daisy Chaining” is used colloquially, since the structure is vaguely reminiscent of a daisy chain. The principle can be used both to achieve a higher total current and to transmit analog signals or digital data.

If the wiring of a power supply system is planned according to this principle, it is not wired in a star configuration. Instead, the current is looped through to the load in a linear or ring-shaped manner on one line.

Read More


 

Product News

  • Prev
With the new Cosy+ Wireless, HMS Networks finalizes the release of the new generation of Ewon ...
Littelfuse, Inc. introduces a new ground-fault knowledge center for engineers, electricians, ...
AutomationDirect has added new stainless-steel specialty inductive proximity sensors from ...
Control of wastewater treatment plants is a complex task requiring thousands of measurement devices ...
Allied Electronics & Automation is now stocking Schneider Electric’s new Altivar ATS480 soft ...
For the first time in machine and system engineering, the MX-System enables completely control ...
The POWER CAGE CLAMP provides the proper clamping force for conductors up to 35, 50, 95 and ...
SCHUNK has developed a versatile gripper for small components for handling of delicate and fragile ...
Introducing the CWG Series Type 1 Galvanized Lay-In Wireway from Hammond Manufacturing, with a ...
An all-in-one control platform for applications requiring high-speed processing, machine control, ...

Panel Builder & Systems Integrator Platform

Panel Builder & Systems Integrator's Bimonthly Digest and related website panelbuildersystemsintegrator.ca is produced for those involved in the design, specification, build, manufacture, installation and commissioning of control panels and systems. With content targeted at the panel building and systems integration segment Panel Builder & Systems Integrator delivers targeted editorial content to the automation and control markets within Canada. Our content offering includes news, features, case studies, proprietary research, best practices and white papers. We overview the latest available products including components, enclosures, drives and controls, circuit and surge protection and full solution offerings. If you are a control or automation consultant, control panel builder, electrical contractor, mechanical contractor, control panel OEM, systems integrator or supply panel and automation components in Canada sign up today for our Bimonthly Digest. Published the second and fourth Wednesday of every month.

Subscribe Here


538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil