Panel Builder System Integrator

February 6, 2020

It’s a world first for the water/wastewater industry: Endress+Hauser’s Proline Promag W electromagnetic flowmeter with the new 0 x DN full bore option delivers great measurement accuracy without any measuring tube restriction – irrespective of the flow profile or mounting location.

Maximum measurement performance is indispensable for optimal process control but in some circumstances is difficult to achieve. Plant operators may have to compensate for flow disturbances by adopting the recommended inlet and outlet runs or by employing a flow measuring device with a restricted measuring tube. However, sufficiently long straight pipe sections may not be not available for the former, while tube restrictions cause pressure loss that often leads to increased energy consumption for pump operations and higher energy costs.

The solution is provided by the innovative measuring concept of Promag W 300/400/500 flowmeters with 0 x DN full bore. Each Promag W features multiple measuring electrodes to detect abnormalities in the flow that can impact measurement accuracy.  This generates a substantially higher density of measured data than for standard devices.  Measurements aren’t distorted by frequently occurring swirls caused by Influences such as a close-knit pipeline network or obstacles in the pipe cause flow turbulence that affect accuracy. These obstacles can include pipe bends and insertion devices or unknown obstacles such as build-up on the pipe wall, protruding seals or different inside diameters.

Promag W flowmeters with the 0 x DN full bore option are particularly well-suited for installation in tight spaces, such as compact systems or skids, because they do not need any inlet or outlet runs. They can be equipped with different Proline transmitters: as a compact version (Proline 300 and 400) or as a remote version (Proline 400 and 500) with up to four outputs. Proline transmitters make no compromises in terms of performance and accuracy. The digital signal processing begins in the intelligent sensor and is the basis for a reliable, highly accurate measurement. Full access to all measurement data, including diagnostic data acquired by Endress+Hausers’s proprietary Heartbeat Technology, is possible at any time thanks to digital data transmission or the freely combinable inputs and outputs.

The Promag W with 0 x DN full bore option’s superior measurement capability along with the Promag W’s refined signal analysis deliver a trio of benefits like no other flowmeter past or present: reliable measured values, flexible installation and cost-efficient measuring operation, with no compromises.

Source

Changing Scene

  • Prev
Rockwell Automation announced that it has signed an agreement to acquire privately held Avnet Data ...
January is traditionally a month for new hope and new energy to meet life and business goals. But ...
Moxa Inc. recently introduced its Industrial Network Defense Solution, which is specially designed ...
FANUC has introduced the new CRX-10iA and CRX-10iA/L (long arm version) collaborative robots that ...
Beckhoff Automation has introduced new TwinCAT Cloud Engineering software for IoT and Industrie 4.0 ...
Brave is pleased to announce that they have been officially recognized as an ABB Authorized ...
CW Mechanical Limited (CW) is a Sudbury-based mechanical services company providing valve repair ...
B&R, a unit of ABB’s Robotics and Discrete Automation business, announced the integration of ...

One of Canada’s largest wastewater treatment plants at Annacis Island provides secondary treatment to approximately 175 billion litres of wastewater every year for over 1 million residents in 14 municipalities. After almost 20 years in operation, the variable frequency drives supporting the critical pumping systems for the primary treatment and secondary treatment facilities had to be replaced to ensure that the plant’s high operational availability and reliability will not be compromised in serving the plant, the surrounding municipalities and the environment. Metro Vancouver Regional District chose to deploy Rittal’s enclosure and power distribution solutions with E-plan software to efficiently support vital infrastructure improvements by reducing equipment replacement times and thereby minimizing risk to plant operations.

Latest Articles

  • Prev
How much do you ❤️ Hammond? We're looking for your photos of our products installed, ...
In their effort to keep your electronics and critical process equipment safe, wallmount enclosures ...
  Innovation comes in all shapes and sizes. One company perfectly positioned to validate ...
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors ...
Phoenix Contact invites you to attend an information seminar on the latest developments and ...
What do you do when you hear directly from installers that they’re frustrated with Ethernet cable ...
Once upon a time, plant floors were isolated from the public network. But, today, all sorts of ...
  The rise of connectivity and connected devices has been a major focus and the driving ...

Working Together for Cybersecurity – Digging Deeper with Mike Hutchings, Vice President, Rockwell Automation Canada

CybersecurityBy Owen Hurst

The rise of connectivity and connected devices has been a major focus and the driving factor behind advancing automation and control products and solutions. And while connectivity is a shining star in terms of creating efficiencies and growth, we are all aware of the darker side of connecting devices, namely the threat posed by nefarious individuals.

 

 

 

 

Read More

When is a Cobot Right for You?

CobotBy Blake Marchand

Robots – or more specifically cobots, may or may not be coming foryour job. But they may very well make it easier.

Robotic systems are most commonly utilized in self contained fencedRobotic systems are most commonly utilized in self contained fencedoff configurations with significant safety measures to keep workerssafe, although in recent years cobots have begun increasing marketshare.

Automated robotic systems generally take up significant floor space,are designed for a specific application or product, and requirecomplex programming to integrate into production.

Read More

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil