Panel Builder System Integrator

PB 26 Allied logo 400On February 15th, 2020, the Roberson Car Wash in Salem, Oregon went up in flames. The cause: a control cabinet with components that gathered excess corrosion from intrusive moisture. The panel components overheated, began arcing, and eventually melted pails of hydraulic oil, igniting dry uniforms hanging nearby.

Electrical control panels can, without proper design and components, be dangerous. A panel’s design, along with carefully selected internal components, is crucial to both safety and complying with regulations and standards.

Design for Efficiency and Safety

There are numerous considerations and challenges in control panel design.

First, most industrial control panels comply with Underwriter’s Lab, UL 508A, the Standard for Industrial Control Panels (now in its third edition) . The 508A Standard is the guiding standard for design and construction of industrial control panels to comply with the National Electrical Code.

Panels should allow for flexibility to accommodate design changes over time and add new components as system needs and demands change. Components should be compact to save space, yet possess excellent performance characteristics to meet specifications, for an optimal and efficient design.  Incorporating such efficiency will decrease overall cabinet size, require fewer parts, and facilitate installation and maintenance.

With an optimal design, spacing and airflow will improve, as will cleanliness (dust, moisture, and other accumulated debris can start fires).

Designing efficient panels also means allowing for easy access and inspection, before testing and replacing any components to ensure operability and prevent fires.   In addition, designs should incorporate sufficient over-current protection to accommodate unexpected amperage draw.  Wiring and wire routing should be optimized to ensure that power to the panel is safe safety and as space utilized efficiently.

Choose Components Wisely

But designing a control cabinet begins, not just with what is on the schematic, and not just with what is on the outside – but what’s actually on the inside. What components do you have to work with, and how do they help to design, build, and operate a better control cabinet?

At the outset of panel design, it is crucial to consider continuity of power to control components and circuit protection. Lack of power supply is a common single point of failure. Be sure the overall design’s power supply has adequate step-down voltage, with over-current protection, and uninterrupted power.

After these conditions are met, choosing the right components is the next order of business.  With reliable components that are durable, high-performing, and safe, cost is reduced, and performance and safety assured.

New components should be configured with features such as flexible wire management, approved and compliant wiring and cabling, adequate insulation, and come from reliable sources with disciplined quality control measures, all while helping the panel designer create an efficient footprint.  For example:

  • Contactors ideally will be climate-proof and suited to the specific environment where they will be used. They should also be adequately tested to all applicable standards within the industry they operate. They should also be selected for sufficient switching cycles specific to their application and depending on how the control cabinet is employed, suited to a wide range of applications.
  • AC Drives should be selected with properties flexible enough to mount within the challenging configurations of a panel’s footprint. Airflow should be adequate to maintain specified design ambient air temperatures and may require additional climate control to regulate humidity and maintain the desired ambient temperature. Power supplied to the drive is often separate from control wiring and should also be incorporated into the design. AC drives should be versatile enough to use in different applications with a wide range of ambient temperatures and climate conditions.
  • Motor starters and thermal overload relays should be compact, easy to use, and allow for simple wiring, yet provide all specified performance characteristics and meet all applicable industry standards. Thermal overload relays should operate with low and high voltage as required, have sufficient margins of protection for the anticipated applications, and be compatible with other components to enable versatility for a panel’s configuration.

While this is just a sampling of some of the key components specified in control panel design, it exemplifies the thought process to explore when looking for the right components for a specific panel, application, and environment.

Integration for Compliance and Safety

Component integration for compliance and safety is an engineering best practice for panel design. Designs must be compliant with NEC, NFPA (NFPA 79 is key,) and UL standards, and consider OSHA requirements as well as any known safety hazards. The components themselves should also be checked for compliance with any specific standards for the industry in which they operate and be compliant with prevailing standards such as NEMA, Canadian Electrical Code, and any other international standards.

“Reliability is a huge factor, and knowing the product is going to work the way that they need it to,” says Mitch McClain, an OEM sales engineer within the Eaton Corporation based in Dallas, Texas. “Footprint has become a topic growing in popularity to reduce the overall size of the panel. It is becoming important to customers to have more compact panels, with fewer components, and can do the work of the larger version of the same panel of the past. Also, versatility is becoming quite important. Being able to mount new or different components as applications and usage of the panel changes is becoming more common as technology and automation evolves. ‘Plug and play’ capable components are also advantageous when old components become obsolete or when better ones become available. Plus, when panels are checked for hot spots, loose connections, and degradation or corrosion, ease of replacement is desired.

Summarily, control cabinets continue to become more important as system automation advances require reliable, versatile components that are accessible, easy and maintain, and most importantly, safe. Designing control cabinets and selecting components with these considerations in mind from the outset allows for greater flexibility and efficiency in construction, maintenance, and future upgrades.

As for the Roberson Car Wash, after being out of business for four months amidst a world pandemic and a complete rebuild, they reopened in June 2020, with fully upgraded panels, and a greater appreciation for what goes inside of them.

Changing Scene

  • Prev
Attend this webinar to solve your automation challenges and become more productive.   ...
Safety, efficiency, and smart design are essential when designing panels and systems.   ...
Eclipse Automation had the pleasure to host Premiere Doug Ford, Minister Victor Fedeli, and caucus ...
The HARTING Technology Group continues to briskly advance the pace of digital transformation. “The ...
Spartan Controls and AltaML are pleased to announce they have entered into a formal partnership and ...
Omron Automation, a leading provider of industrial automation solutions, congratulates Taylor Fluid ...
On July 15, EPLAN Canada will host an Added Value Webinar focused on routing, wiring and production ...
Eramosa, a North American provider of SCADA, network, cybersecurity, operational technology, and ...

RS Components Launches New Season of the DesignSpark Podcast Tackling Technology With a Comedy Twist

RS Components DesignSpark PodcastRS Components (RS), a global multi-channel provider of industrial and electronic products and solutions, has released a new series of its popular ‘DesignSpark Podcast’ which explores some of the hottest topics in technology through a mix of fun facts, exuberant stand-up, outlandish sketches and foot-tapping songs. The podcast offers educational information on each technology topic, with an entertaining comedy angle.

The new weekly podcast is co-hosted by technology expert Professor Lucy Rogers PhD – former judge on BBC’s Robot Wars and a DesignSpark blogger – alongside award-winning comedians Bec Hill and Harriet Braine.

Read More

 

Module_Divider.png

JMP Solutions and Control Station Announce Exclusive Collaboration Focused on Optimizing Manufacturing Output and Efficiency

JMP SolutionsJMP Solutions and Control Station are joining forces to provide process and control loop audit services for manufacturing environments in order to identify and optimize problematic and underperforming control loops. The partnership leverages the complementary skillsets of JMP’s expert process engineering and project management competency combined with Control Station’s proprietary process analytics platform which, will work in synergy to identify and correct PID loop related sources of inefficiency and sub-optimal performance.

Read More

 

Module_Divider.png


Proax Is Now a Distributor of HIWIN

PB-34-Proax-HIWINLogo-400.jpgProax are pleased to announce that they are now a distributor of the HIWIN product line, a leader in motion control and system technology. Their product offer includes linear guideways, ballscrews, actuators, linear motors, torque motors & rotary tables, crossed roller bearings and more. This addition comes in line with the enhanced mechanical team and product offering announced last year by Proax. This newly added line will be available to all Proax's clients throughout Canada since this is going to be implemented on a national level.

Read More

Cybersecurity and Manufacturing – Keeping Critical Information Safe From Attackers

JAE AutomationWe all know that we’re supposed to back up our data and secure our devices against attack. But too often we put it off until it’s too late. We’re busy, and we’ll get to it another day. And then, one day, we turn on our device, look for a file, and realize something is wrong. We’ve been hacked.

The thought of losing our files, pictures, and data is scary. Scale that up to an entire company and the consequences can be severe. Think about the amount of critical and sensitive information the typical manufacturing facility has access to. Sensitive customer records, design and engineering data, intellectual property, and industrial control systems for high risk manufacturing processes – there’s a lot to lose. 

Read More

 

Module_Divider.png

Phoenix Contact Control Cabinet Classroom Ep. 6: How to Determine Supplementary vs. Branch Circuit Breakers

Phoenix Contact Control CabinetSometimes it can be difficult to distinguish between types of circuit breakers, especially since in appearance they look so similar. In this episode, the focus will be on the differences between two types of circuit breakers: Branch and Supplementary.

In the Control Cabinet Classroom video series, Phoenix Contact Product Specialists Zach and Karen break down some of the basics of control cabinet design, terminology and technology to be able to better understand and utilize this powerful solution.

 

 

Read More

Product News

  • Prev
The NaviTEK IE is a tester for commissioning, preventative maintenance, and ...
R. STAHL is authorized to certify customer-specific systems for installation in hazardous ...
Maplesoft™ announced the release of MapleSim™ Insight, a new software product from Maplesoft that ...
Yokogawa Electric Corporation announces the release of new pressure and temperature sensors for the ...
Branson™ GL-300 platform increases production capability and enables faster production start-up. ...
Omron Automation Americas launches the heavy-duty HD-1500 mobile robot with an exceptionally large ...
The superior safety of Eaton’s Arrow Hart ultra grip locking devices has been enhanced with colour ...
IDEAL Safe-T-Grip® Fuse Pullers are made of molded, tough, high-impact nylon for greater strength ...
As summer heats up Rittal will be announcing two new updated LCP product lines.     ...
As of April 1, Rittal has changed the portfolio of signal pillars to the latest LED technology. ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil