Panel Builder System Integrator

March 9, 2020

The relationship between humans and robots in manufacturing is constantly evolving. Technology advancements and safety improvements have made it possible for manufacturers to move robots out from behind the cage to interact more closely with workers. Depending on the type of application, this collaboration can open new possibilities for increased productivity, efficiency, and flexibility.

That said, collaborative robots, or cobots, are not going to replace traditional robots entirely. Instead, cobots serve as just another tool in the toolbelt when determining the right equipment to implement on the factory floor. While collaboration between robots and humans will undoubtedly play a role in the future of manufacturing, how this looks will depend on the needs of each individual company.

Collaborative robots – an evolution of robotics and automation

As the name suggests, cobots are designed to work side-by-side with people on the factory floor and complement a human worker. They can be thought of as an assistant, lifting heavy objects, handling repetitive motion, or completing difficult and complex tasks that are unsuitable for human workers.

In 2018, cobots only made up around 3 percent of total robots installed in factories. They are, however, one of the fastest growing segments in robotics. One estimate suggests that the market for cobots will exceed $11 billion by 2030, representing 29 percent of the total industrial robot market.

It’s this growth that’s made cobots one of the biggest buzzwords in the industry today. Cobots have been positioned as everything from the replacement to traditional robots to the future of manufacturing as a whole.

However, when looking at technology, manufacturers need to be able to step back from the hype and evaluate it based on how well it aligns with their specific applications. While cobots bring increased flexibility, they also generally must operate at slower speeds due to safety regulations. Similarly, anything with a sharp edge or pinch point, such as a cutting tool or press, poses a significant risk if a worker gets too close. Even a standard robot arm, which may seem like a good fit for a cobot, may not be if it’s lifting heavy or large objects that could be dropped or swung near workers or other equipment.

Instead of viewing cobots as a replacement to more traditional robots, manufacturers should instead view them as an evolution of the technology. Cobots are, ultimately, still robots, and deciding when to use them comes down to whether they fit in the production process.

The safety features making collaboration possible

Robotics technology is constantly improving, and new safety features are making increased collaboration between humans and robots possible in the right applications. Integrated sensors, passive compliance, and overcurrent detection are all designed to stop motion if a robot detects a collision, while safety light curtains can create an invisible “cage” around a robot. Using a mix of sensors and lasers, the robot can know where people and other machines are and slow down, stop completely, or even back away if it detects something in the zone.

These type of safety features make a hybrid approach possible. Manufacturers can deploy more traditional robots equipped with light curtains for applications that require moderate speeds but still need to be accessed by people. Dangerous, high temperature, or high-speed processes can still be behind cages, while cobots could be used for processes that require closer collaboration.

In the end, any type of interaction between humans and robots will lead to more safety planning, supervision, training, and risk, while likely requiring slower speeds. Companies deciding whether to take a collaborative approach should be aware of these hidden costs and ensure that their equipment meets or exceeds required safety regulations.

Designing the right approach to collaboration

Like any new technology, it’s easy to get caught up in the hype before fully understanding the advantages and disadvantages as they relate to your application. Collaborative robots represent another option for manufacturers with the right type of applications, while new safety features have made traditional robots more suitable to interacting with people and coming out from behind the cage to play a more integrated role in the production process.

When deciding whether or not to implement collaborative robots, manufacturers should take a design first approach to understand their facility, identify where improvements can be made, and determine how changes to one area impact the process as a whole before deciding on the best way to achieve those benefits.

Source

Changing Scene

  • Prev
Pilz will be hosting several conferences for their 2020 Virtual Trade Show starting on Tuesday May ...
Koch Engineered Solutions (KES), a unit of Koch Industries Inc., recently announced it has acquired ...
Festo Canada is pleased to announce Electrozad, the largest independently owned electrical ...
Littelfuse, Inc., a global manufacturer of technologies in circuit protection, power control and ...
Allied Electronics & Automation has added more trusted suppliers to its 300-strong network, ...
Rockwell Automation announced that it has signed an agreement to acquire privately held Avnet Data ...
January is traditionally a month for new hope and new energy to meet life and business goals. But ...
Moxa Inc. recently introduced its Industrial Network Defense Solution, which is specially designed ...
FANUC has introduced the new CRX-10iA and CRX-10iA/L (long arm version) collaborative robots that ...

One of Canada’s largest wastewater treatment plants at Annacis Island provides secondary treatment to approximately 175 billion litres of wastewater every year for over 1 million residents in 14 municipalities. After almost 20 years in operation, the variable frequency drives supporting the critical pumping systems for the primary treatment and secondary treatment facilities had to be replaced to ensure that the plant’s high operational availability and reliability will not be compromised in serving the plant, the surrounding municipalities and the environment. Metro Vancouver Regional District chose to deploy Rittal’s enclosure and power distribution solutions with E-plan software to efficiently support vital infrastructure improvements by reducing equipment replacement times and thereby minimizing risk to plant operations.

How Omron's Robotic Solutions Increased a Chocolate Company's Production By 40%

OmronAt BOLCi Bolu Chocolate, a Turkish manufacturer of elegant truffles and other delicacies, the opportunity arose for some improvements to its production system. With over 300 employees and a 20,000-square-meter factory, BOLCi has a product list of over 800 different items and produces and average of 200 tons of chocolate items each month.

BOLÇİ’s guarantee to its customers is that its chocolate is never sullied by human touch during production or packaging. In order to maintain this immaculate status and reach increasingly high production targets, the chocolate manufacturer turned to Omron and system integrator Innovas to devise an automated solution for its packaging line.

Read More

David Willick of Schneider Electric talks Optimizing Mining Operations, Integrated Technology and Sustainability in Mining

Schneider ElectricBy Blake Marchand

Based out of Toronto, David Willick, VP & Regional Segment Leader for Mining, Metals and Minerals, Schneider Electric, is a mining industry veteran. Being with Schneider for the last three years, he is really starting to see the mining community focus in on producing sustainable products by utilizing new technologies and data analytics platforms.

“I’ve been in the industry 30-years and I’ve never been more excited than I am today,” he said, and being with a company like Schneider that has really taken a leading role from a sustainability perspective makes it that much more interesting.

Read More

Product News

  • Prev
The new multifunctional MACX-TR timer relays from Phoenix Contact now make simple time control ...
The PTFIX product family from Phoenix Contact has now been extended to include a nominal cross ...
For the very first time, manual deburring processes can be automated with the robot deburring tool ...
At the show, an M-710iC/45M robot used the 3DV/1600 vision sensor to quickly find and snap boxes of ...
Industrial producers can now improve their network resiliency by using primary and backup adapters ...
Festo is meeting the need of the North American automotive sector for a powerful yet flexible valve ...
AMT series encoders from CUI Devices are advanced capacitive encoders with a variety of uses. AMT ...
Seifert SoliTherm Thermoelectric Coolers from AutomationDirect use the Peltier Effect for ...
Safety Machine Analytics is used to monitor and analyze safety systems on machines. After quick and ...
Inductive sensors are still the first choice for detecting metallic objects. However, ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil