Panel Builder System Integrator

August 8, 2019

Intertec Instrumentation is launching a range of tough field enclosures for housing remote I/O and other control and instrumentation electronics, featuring compact passive cooling to dramatically reduce costs of ownership. The new enclosures help EPCs and processing plant engineers to eliminate the need for large and costly plant buildings such as satellite instrument houses or remote instrument enclosures - which often need to be air conditioned and blast- and fire-resistant.

Fabricated from GRP (glassfiber reinforced polyester) materials, the enclosures provide rugged dust- and water-proof environments to protect remote control equipment located deep inside processing areas. Developed at the request of clients, the enclosure concept simplifies the roll-out of more versatile distributed control architectures containing field equipment such as software-configured I/O, IIoT networking and PLCs. The advance can allow field control equipment enclosures to be assembled and sealed in the factory - an efficient and cost effective process - avoiding the need for opening and exposure to dangerous local conditions at the site during installation and operation.

The ability of Intertec GRP enclosures to be fabricated with embedded insulation (a monolithic sandwich with layers of GRP sheet enclosing insulation) is a major virtue. Insulation is commonly required because modern remote I/O applications use sensitive electronic devices, with lifetimes and reliabilities that are drastically reduced by overheating. Efficient insulation helps protect against temperature extremes. This is one reason why the simple steel cabinets widely used for cabling-related field junction boxes are not adequate for some of the more sophisticated remote I/O applications now being deployed.

Because of the electronic devices used, some form of cooling may also be required. If power is available at site, this can be in the form of conventional fan cooling. However, the temperature stability of highly insulated GRP boxes also makes it possible to efficiently exploit passive cooling techniques which require no electricity and have no moving parts - also making them suitable for deployment in hazardous areas. A tank of water plus a heat exchanger utilize the coolness of the night to moderate interior temperature during the day.

As many advanced remote I/O applications will - by their nature - be compact and small, Intertec has designed new passive cooling systems for smaller-sized cabinets and enclosures. These include a passive cooling system with a heat exchanger that doubles as a sunshade. The performance of the passive cooler can also be boosted by a small active element – such as a water cooler. Intertec can fabricate passively cooled field protection systems like this in enclosure and box sizes down to around 40 liters in volume. www.intertec.info

Source


Proax Is Now a Distributor of HIWIN

PB-34-Proax-HIWINLogo-400.jpgProax are pleased to announce that they are now a distributor of the HIWIN product line, a leader in motion control and system technology. Their product offer includes linear guideways, ballscrews, actuators, linear motors, torque motors & rotary tables, crossed roller bearings and more. This addition comes in line with the enhanced mechanical team and product offering announced last year by Proax. This newly added line will be available to all Proax's clients throughout Canada since this is going to be implemented on a national level.

Read More

Latest Articles

  • Prev
True North Solutions, a Calgary-based industrial engineering solutions company, has recently ...
Nexans, a driver for the world’s transition to a more connected and sustainable energy future, has ...
The phrase “up-time” is an oft-repeated phrase for IT professionals, reflecting the fact that a key ...
The International Society of Automation (ISA) recently served as the partner for an independent ...
A local manufacturer intended to complete the setup and installation of a high-speed ...
For three decades, Endress+Hauser Canada has been building strong relationships with customers ...
  I think many of us right now are caught at a point where we are either looking back at ...
Electromate has been recognized as the 28th Best Workplace in Canada. This list, and related ...
If you are interested or in the midst of switching from making cars, beverages, apparel or ...

Cybersecurity and Manufacturing – Keeping Critical Information Safe From Attackers

JAE AutomationWe all know that we’re supposed to back up our data and secure our devices against attack. But too often we put it off until it’s too late. We’re busy, and we’ll get to it another day. And then, one day, we turn on our device, look for a file, and realize something is wrong. We’ve been hacked.

The thought of losing our files, pictures, and data is scary. Scale that up to an entire company and the consequences can be severe. Think about the amount of critical and sensitive information the typical manufacturing facility has access to. Sensitive customer records, design and engineering data, intellectual property, and industrial control systems for high risk manufacturing processes – there’s a lot to lose. 

Read More

 

Module_Divider.png

Phoenix Contact Control Cabinet Classroom Ep. 6: How to Determine Supplementary vs. Branch Circuit Breakers

Phoenix Contact Control CabinetSometimes it can be difficult to distinguish between types of circuit breakers, especially since in appearance they look so similar. In this episode, the focus will be on the differences between two types of circuit breakers: Branch and Supplementary.

In the Control Cabinet Classroom video series, Phoenix Contact Product Specialists Zach and Karen break down some of the basics of control cabinet design, terminology and technology to be able to better understand and utilize this powerful solution.

 

 

Read More

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Pulse Frequency Modulation (PFM) is a way to digitally represent an analog measurement value from a ...
Manufacturers Automation Inc. introduces the new SDS-3008 Smart Switch, featuring a compact and ...
A new range of pressure transmitters designed to meet key requirements in most manufacturing and ...
Parker Hannifin, a global provider in motion and control technologies, has extended its Parker ...
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic ...
Phoenix Contact, Quectel and Ericsson have worked together to develop and deploy the first ...
Sensor manufacturer POSITAL has introduced an inexpensive and flexible alternative for ...
Eight well-known manufacturers established on the market for M12 connectors ­– Phoenix Contact, ...
The AutomationDirect Productivity2000® PLC is a modular, rack-based system with a full lineup of ...
FANUC America, an automation solutions provider, is offering a free trial version of CNC GUIDE – ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil